Showing posts with label solar space heater. Show all posts
Showing posts with label solar space heater. Show all posts

Sunday, December 7, 2014

Best Kozy World GLD2460R Fireplace Log Set, Vent-Free, Dual Fuel, 24 Deals

Kozy World GLD2460R Fireplace Log Set, Vent-Free,  Dual Fuel, 24 Inch
Customer Ratings: 5 stars
List Price: $499.00
Sale Price: $442.10
Today's Bonus: 11% Off
Buy Now

Was scared at first that it would be delivered and some of the logs would be broken. I have heard a few people say this had happened to them. Not particularly with this product or company, but in general. Anyway, it got delivered to my house and within 30 minutes I had it up and flaming. Nice set, remote works awesome. Important to note, the connection point for gas in on the back right-hand side. On the unit I was replacing, it was on back left. Luckily I had a longer flexible gas line in my garage.

Click Here For Most Helpful Customer Reviews >>

Tuesday, November 25, 2014

Reviews of iLIVING ILG938 Air Purifier with HEPA Filter

iLIVING ILG938 Air Purifier with HEPA Filter
Customer Ratings: 3.5 stars
List Price: $229.99
Sale Price: $165.66
Today's Bonus: 28% Off
Buy Now

Got this on time and worked right out of the box. At first I was debating either this one or another purifier but the remote and 3 years warranty really stood out. Used it for a few days in the kitchen and bathroom it does wonders! What surprised me the most was we have a smoker in the house and this machine removed the cigarette smell just over night. My friend saw it and bought one for his house. I would definitely suggest giving this purifier a test drive.

Click Here For Most Helpful Customer Reviews >>

My husband and I bought this unit 2 weeks ago thinking it would improve the air quality in our home and help cut down on some of the dust. After I received the unit, I went through the manual and set it up according to the directions. This unit has made absolutely no difference in the air quality in our home. Dust flows right through it despite the filters. We use it in our living room, (350 sq. ft.) and it does nothing. There's no way this thing cleans 3000 sq. ft. of air. The seller claims that there's a 30 day satisfaction guarantee but when we contacted the seller so we could return it, we were informed that if the unit wasn't sent back in the original packaging that there would be a 15% ($24.00) re-stocking fee, which is something they don't advertise here on Amazon. Don't buy it. It's a waste of money, the unit doesn't work as advertised, and the customer service is terrible. I would never buy from this seller again.

Best Deals on iLIVING ILG938 Air Purifier with HEPA Filter

This is an excellent air-purifier after conducting my research. Comparable to similar designed box units but less expensive. Construction appears very good. I also like the look and styling of the unit.

Capabilities:

-Ozone generator. Five level setting. Very powerful. You can also turn ozone generation completely off.

-Negative ion generator 1 level setting. Can be turned on/off.

-Sterilization using UV light, 1 level, can be turned on/off.

-Fan speed has five levels. Lowest is very quiet, highest is no noisier than a typical room fan.

-LCD display with back light. The back-light is bright but it has a button to dim it.

-Small remote control works nicely.

So far very impressed with unit. Have only had it a few weeks so I cannot comment on its durability but the construction appears very well made. Even though it uses a washable HEPA filter, and the instructions with unit recommend replacement once a year, the HEPA filters are very reasonably priced which makes it a better option. So far I am very pleased about this product and I highly recommend it compared to the other alternatives I found in the market.

Regarding the seller, the purchase transaction was very smooth. The product was well packed and shipped promptly. I had some questions about HEPA filters and the seller promptly answered. Very professional and helpful. Excellent product at a very good price. I will buy again from this store.

Honest reviews on iLIVING ILG938 Air Purifier with HEPA Filter

This item worked just fine for a few months, once I figured out how to position the plate and filters. When I went to put it back in use during allergy season, it didn't power up. I checked inside and found the UV light was broken. But where the heck do you get a UV light for this thing? Also, the directions say to check the fuse, but I couldn't get the fuse cover off. There's no information in the instructions about who to contact or where to take it to get fixed. What a pain to get it serviced!

Find helpful customer reviews and review ratings for iLIVING ILG938 Air Purifier with HEPA Filter

For anyone purchasing this unit, there are a few things you should know that will make your life easier. =)

STEP 1 -If you plan to use the ozone generating feature, then before you start up your unit, install the O3 plate (located in a separate box packaged inside the carton) by removing the four screws on the back of the unit. Remove each filter keeping them in the order you removed them. When you have removed all of the filters, there are two slots (center, top and bottom) where you will need to slide the O3 plate in. Make sure the arrows are pointing up and slide the plate towards the front of the unit. [DO NOT run the "Purifying" feature which is the ozone generating option if there are humans or pets in the house! I ran mine for about 30 minutes, and even had two windows open about 12" and my throat and sinuses became very dry and I had a strange metallic taste in my mouth and throat.]

Replace each filter in the same order you removed them. Be sure the last filter does not have the outside edge of it sticking out on the bottom or the unit will not work.

~~~~~~

The instructions in the user's manual are incorrect (per the Service Technician from the company where I purchased mine).

The instructions say that "you will know the Sterilize feature is activated from the soft blue glow visible through the front grill."

According to the Service Technician, "when you press the "STERILIZER" button, the sterilize feature of the purifier will get activated. You'll know that by looking at the LCD display panel."

~~~~~~

The instructions also say that you'll know the Anion feature "is activated as the orange bulb will be lit and clearly visible through the front grill."

On my unit, you have to put your face up to the unit to see the not-so-clearly-visible orange light. I have mine on top of a bookcase. If you place your unit up high, you WILL need to stand on a chair or step stool to see the orange glow.

Other than these few issues, I really like this Air Purifier. It's been running eight hours now in our 2-story great room and there is a noticeable difference in the quality of the air. The house smells fresh and not like dogs! YAY!! So far, so good!

Update: 12/6/12 still running 24/7. Our power fluctuated the other day and the purifier turned off. I noticed it a day later and turned it back on. The purifier started right up and is continuing to do its job. Definitely makes a difference keeping the air fresh and clean... even after you have a mishap in the kitchen that sets the smoke alarm off! =) Still loving it. =)

Update: 5/21/13 still running 24/7. Hubby sanded & refinished the hardwood floors in our foyer and the dust residue was ridiculous! The air purifier stopped running so I cleaned the back screen which was clogged up with dust. Not sure how to clean the filters (except for the ozone plate) because the instruction booklet is useless. The unit started right up and is running again. I sure did notice a huge difference while it wasn't running. So far! SOOOO GOOD!!! I am very pleased with this air purifier and so are my lungs. Definitely helps with the asthma. =]

Buy Fom Amazon Now

Wednesday, November 19, 2014

Cheap BISSELL ProHeat 2X Select Upright Deep Carpet Cleaner, 9400M

BISSELL ProHeat 2X Select Upright Deep Carpet Cleaner, 9400M
Customer Ratings: 4 stars
Buy Now
I am a 52 year old widow with 4 grown children, and I've always had at least one dog; now with the kids gone I have 3 small dogs. This is the third carpet cleaner I've purchased over 15 years. The first was a Hoover, and though I thought it worked fine, advances over the years have made big improvements both in the machines' ability to clean, and their design.

My second machine was the old version of this machine, which was 5 years old, and still working, but one of the kids borrowed it, and when I stressed the importance of cleaning after use, she went nuts and disassembled the thing to clean it (totally unnesessary), and it came back not working well. Obvious user problem, not the machine's fault.

So, I ordered the 9400 Select, which arrived promptly from Amazon, quickly assembled it, and went to work in the bedroom. With 3 dogs, I clean the carpet every 3 months. My dogs are potty trained, but they are dogs, after all, and unlike me they can't remove dirty shoes when they enter the house. Amazing what 12 little feet can track in to a carpet! So, between my normal use, and the dogs, I am always looking for the best machine.

I am going to post some pictures of the things mentioned, if this site allows... By the way, the room I did first and will base these comments on is a 12x15 foot bedroom, with very light colored carpeting. Some reviewers expressed frustration with the fuzzballs that can get left behind. Yes, this machine does that. It is old carpet, dog fur, and dirt. It is confined, slightly damp, and picks up easily. In this room there were maybe 12 chunks of this stuff, which were picked up as I went along. Not slimy, didn't require toweling or gloves.

Next, one reviewer said the machine leaks dirty water spots all over. Again, the machine at the end of a pull does leave some water spots. As soon as you go over the pull again, they are sucked up, leaving no spots in the wake. When I am changing the dirty water tank and refilling the bladder, I always throw a towel under the machine for the few minutes I am away. This is a water/detergent based machine; of course some excess might drip out when it is stationary. All of my machines did this, so I don't even think of it as unusual.

As for not knowing when the bladder is empty and needs refilling, I did not hear the "pop" some reviewers did, but I didn't need to stop and check the level, either. I just paid attention when pulling the trigger for the cleaning mode, and if nothing was being sucked up when trigger is released and it is in suction mode, which one can easily see through the clear design, I know there is nothing going out, and it's time to throw out the old water and refill the bladder. In this room, I take an hour or so to clean it properly. People who want a 10 minute clean are going to get exactly that. It takes months, sometimes years for carpeting to get dirty, but some folks want it to be cleaned in 10 minutes. I just don't get that. The trick is that though this is a very easy machine to use, the key is in going SLOWLY, and allowing the machine to do what it was designed to do. Get the fibers wet/soapy; then let the brushes get down deep, suck up the slop the machine cleaned, then turn the dial to rinse only (I always do this, though many don't, because in my opinion detergent residue left behind becomes a magnet of sorts for dirt once the carpet is dry). In any case, to do the job right, this room took me about an hour. Time well spent, with excellent results. Cleanup is a breeze. Take the bladder/ takeup container, empty it, then pour water through the take up holder to get any remaining dirty water out. This takes all of about 1 minute.

If my trend of getting a new cleaner about every 5 years continues, and in that time I use the machine 20 times, this is a bargain.

I am thrilled with the results this machine gives, and highly recommend it. I guess the only other issue I could address is the storage, and I do understand that it is slightly bulkier than a traditioner vaccuum cleaner, and if one doesn't have a spare closet it could be a problem. In this house, it just rests under the basement staircase, ready and waiting to be called into action again.

Click Here For Most Helpful Customer Reviews >>

I have been through the ringer with carpet cleaners and stain removers. We have a dog that vomits about once a week. Unfortunatley, he does not do this on our wood floor, which comprises most of our house, but rather he prefers to stain our carpet. I think it is the law with him.

Anyways, I had no luck with the SpotBot I purchased so I was a little reluctant to try another Bissell Product. I saw the good ratings for the 9400 and figured I would give it a shot.

It seems to have everything one could need on a steam cleaner and it even includes Scotchgard Protection. I tried the Bissell on a tough stain that had set in for a couple of months. Nothing could get it out not even the Rug Doctor from the supermarket.

At first the Bissell did not totally get it out. So I tried it again with the hottest water I could get and heated the water with the built-in heater. Sure enough it got it out like a charm. I think Chem-Dry will have to find another customer now!

Steam cleaners are kind of a pain to use with all the filling of tanks and solutions and they usually soak your carpet. But I finally found something that can get up just about any stain and leave my carpet clean as a whistle. We have a winner!

Best Deals on BISSELL ProHeat 2X Select Upright Deep Carpet Cleaner, 9400M

I've been wanting to steam clean our carpets in our house for a number of years now. We had them professionally cleaned before moving in (8 1/2 years ago!!). Three kids, a dog, and a cat later have reduced our carpets to what I thought, was their last legs. The carpets are probably 12 years old (they were not new when we moved in, I am guessing here).

We have carpeting in our kitchen, our kitchen table rests on the carpet. You can imagine how dirty they look(ed) after years of spilled milk, cereal, wine, ketchup, etc... We had planned on ripping them up and putting in tile or Pergo in the next few years.

So this past week our dog gets sick and really puts me over the edge here. I decide to rent one of those "Rug Doctors" at the grocery store. However, I realize that it will take days for me to clean all the carpets and I really don't want to have to shuttle the Rug Doctor back and forth to the grocery store (about 15 20 mins away). On a whim, I check out the reviews on Amazon and find that the Bissell 9400 is the real deal. There is even a reviewer mentioning his sick dog.

So I decide to go with the Bissell.

It was very well packaged, little boxes for all the accessories (there are a ton of them). There is even a mesh bag full of various cleaners (wish I knew that before I bought $60 worth of cleaners!!). The Bissell goes together in about 10 minutes (including the time it took to locate my screwdriver).

I used the Bissell "Pet Strength" cleaner, taking two bottles to do two rooms (wayyy more than is required, but these were dirty carpets!!).

It is a slow process, you have to push the cleaner forward, depressing the trigger. Move slowly, then pull back with the trigger depressed. A few passes more will remove the moisture.

I didn't count the number of times I had to empty the resovoir and fill the water & cleaner. It certainly was a breeze to do.

This first pass took me some 3 hours to do, but was well worth it. I am willing to bet that this will go faster now that they have been recently cleaned!

I noticed a huge difference before they even dried!! The carpets were no longer soiled, almost all the food stains had been removed, the nap was much fluffier. I pulled out about a large handfull of cat/dog/human hair that the brushes spit up( This is normal and nothing to worry about, its much better in the trash than ground back into the carpet).

Once they dried (overnight) and after a pass with our Kirby, they looked incredible!!

My daughter walked barefoot on the cleaned carpet and on one in our family room (that is scheduled for next week). She said the clean one was a lot more cushier.

When I walk in the house now, I am greeted by a nice scent (there is a scent in the pet-strength cleaner) and a very clean-looking carpet!

I intend to clean our furniture as well as the rest of all the carpets. I'm beginning to believe that this will help with our allergies too....

If you are on the fence about this, go for it! You will not be sorry.

Oh, I mentioned above and will restate it. Do NOT use this like a vacuum cleaner, pushing and pulling at a fast clip. Go slow!! You will reap the benefits..

Update: 8 Apr 2006

Still very happy that we got this. Last weekend I completed the cleaning of all the original carpets in our home. I had to do all of our Master Bedroom in 3 passes (moved furniture around) because the pets loved to sleep under the bed, beside the dresser, etc). Before last weekend, the only "Original Carpet" uncleaned was the Master BR. The difference in smell when walking into the Bedroom was noticeable. (Before cleaning). We never noticed the pet odor because we were 'used' to it throughout the house. Once I cleaned the rest of the house, the odor in the remaining room stood out.

After cleaning the Bedroom, I've noticed a very signifigant impact (for the better) on my allergies. Cleaning the carpets under the bed where we sleep made a huge difference.

On another note, I cleaned a pet stain (from where our dog was sick) in my daughter's room. The carpet in there is only 6 months old. I couldn't believe the hair it picked up! I originally thought I could bypass all the new carpeting, but am in the process of cleaning all the new carpeting too!

OK, in case you haven't guessed it... This was by far the best $250 I've ever spent!

Honest reviews on BISSELL ProHeat 2X Select Upright Deep Carpet Cleaner, 9400M

I didn't think a cheap, inexpensive, household extractor would do a good job, but I was wrong. It does a great job. The spinning brissles do the trick, they really spin fast. It scrubs stains out better than a washing machine can get stains out from clothing. My friend uses this thing for house cleaning and she has been told many times that she does a better job than the carpet cleaning companies around our area. Reviewers mentioned the exhause being a design flaw because it breathes into the carpet. It is not a flaw, the warm air assists in drying the carpet. The turbo paw is fairly well built, it doesn't spin as quickly as the main brissles but it does much better than just a regular scrubber. I think peoples' expectations of the turbo paw are set high after seeing the floor extractor in action. I thinks it's great esspecially for $225. Can't top it.

ONE TIP: After shampooing, you may want to go over the carpet one final time to get any excess water from the carpet, turn your heater OFF. The heater draws from the 12 amp motor which steals power from the sucking mechanism.

Find helpful customer reviews and review ratings for BISSELL ProHeat 2X Select Upright Deep Carpet Cleaner, 9400M

I don't normally write reviews but I was compelled to say something about this one! We purchased the 9400 off of Ebay and I must say, it is absolutely amazing! I've used a few differant kinds of carpet shampooers (including a rug doctor and a few differant Hoover models) and this one just blows them all out of the water! It's bought new life to our carpets, it even got out old koolaide and grease stains out of our dining room. Our carpets look and feel brand new, and with two young kids and a dog, it's a great thing to have around. Honestly, even if you think your going to have to replace your carpets, try this out first, you might be surprized at what it can do! I'm not normally about dropping so much money on any one thing, but it's alot better than having to buy new carpeting in a few years! It's really easy to use, I LOVE the tank in tank thing b/c there's only one thing you have to take to the sink. The two rows of brushes leave your carpets freshly groomed, and can really bring all of the dog hair up and out of the floor. It does spit it out in hair balls, but it's supposed to do that so it doesn't clog up the machine. All of the tools work great except for the turbo brush, which is just kinda a joke. If you want to save some $$ though, try looking for the 9200 on Ebay and buy any extra tools you really need off of the bissell website. I was lucky enough to find the 9400 for $70, just check it out first, you never know!

As for some of the problems other people have had... on ours the brushes do stop moving when it is upright so we can use the tools, but because on some other ones the brushes don't stop, be sure to check that when you get it. Also, I recomend following the directions on the review from the engineer and drill a couple of holes in the back for the exaust. We noticed that it was getting pretty hot after use, so we decided to do this and it helped increase the suction and it doesn't get hot anymore. Maybe this is why some people's machines poop out after only a few years, I imagine the motor would eventually burn out from overheating. It really is stupid that they put the exaust on the bottom of the machine, air can't really escape because it's right against the carpet. Just be carefull not to drill into something you're not supposed to!!!!! We only needed to carve out a couple holes about an inch above the existing exaust vents. I know some people have had a problem with suction, for us it exstracts about 70-80% of the dirty water, which is what is expected according to the bissell website. Also, if you have any problems, check out their troubleshooting page, there's some good suggestions on there that could really help you out or at least narrow down the problem.

Everything said here, it's worth it's weight in gold!! Even if you have some of the problems that some others have had, they are repairable and it's worth the effort to fix because it works soooo great!!! Hope this helps!

Buy Fom Amazon Now

Best Hunter 44760 Multi-Stage Heat Pump Thermostat Deals

Hunter 44760 Multi-Stage Heat Pump Thermostat
Customer Ratings: 3.5 stars
Buy Now
I purchased this thermostat because I like the programmable setback features as well as the ability to see how long the system has ran in a given day. However, during the heating season my heat bill almost doubled. I had HVAC techs out 4 times, under warranty thankfully, to check the heat pump and they kept saying it was ok. Finally the last guy who came out determined it was the thermostat. The thermostat will run the heat pump for 15mins (this is preprogrammed and NOT changeable). If it hasn't reached its set point within that time it brings in Aux heat until it reaches its set point. When it's cold you're almost always running on Aux heat. For me that was electric and you can imagine the bills. I have since went with a thermostat that has Adaptive Intelligence (Honeywell) that will only bring in Aux heat when needed based on an internal calculation. The Adapative Intelligence thermostats will also shut off the Aux heat when it gets close enough to the set point that the thermostat knows the heat pump can do the rest. This Hunter thermostat works great for A/C, just not for heat with electric backup (Aux).

Click Here For Most Helpful Customer Reviews >>

I bought this thermostat a couple of weeks ago; it has been working well so far and has plenty of bells and whistles. Installation was fairly straight-forward; the instructions were a bit unclear, but one call to their support staff took care of that problem. This unit seems pricy when compared to other thermostats, but it was the only one that I could find for a multi-state heat pump system. But since I was able to install it myself, and it has been working well since then, I'm not particularly unhappy about the price.

Best Deals on Hunter 44760 Multi-Stage Heat Pump Thermostat

Bought this thermostat yesterday to replace the mundane mechanical manual one on my Ruud heat pump system. Included instructions for wiring could not have been any clearer. Programmed weekly schedule in 10 mins. I would highly recommend this to anyone.

Honest reviews on Hunter 44760 Multi-Stage Heat Pump Thermostat

We got the thermostat for its programmability and the way it switches between heat and air. All those are great. BUT when the heat does run, the auxillary heat kicks on EVERY TIME. I have spent more time than I care to admit on the phone with tech support, then I found the review that explains that it is what this one does... in an electric heat pump, auxillary heat is VERY EXPENSIVE. So much for the energy star! We have purchased another...Our heat system had NEVER had its auxillary heat on in its four year life. We've replaced it and returned it. I'm watching for my electricity bill and worried...

Find helpful customer reviews and review ratings for Hunter 44760 Multi-Stage Heat Pump Thermostat

We had previously installed a regular programmable thermostat for a standard system. Unfortunately we found out two years (too late) later that if you use a regular programmable thermostat with a heat pump system then you never actually use the heat pump in the winter you always run off of emergency heat which uses a ton of electricity and runs up the electric bill big time! We've since installed this unit and it works excellent. There are so many programmable features I don't even know where to start! This is an exceptional unit for the price you won't be dissatisfied!

Buy Fom Amazon Now

Friday, July 25, 2014

Cheap Ceiling-Mount Industrial Electric Heater - 7500 Watt, 31.3 Amp

Ceiling-Mount Industrial Electric Heater - 7500 Watt, 31.3 Amp, 25,600 BTU
Customer Ratings: 5 stars
Buy Now
Fahrenheat Ceiling-Mount Industrial Heater 7500 Watt, Model# FUH724

This couldn't have been easier. I chose this heater over a gas model because I had a 220 run right by where I wanted to mount it, but no gas lines even near my garage. There was also a junction box right there that supplies power to my shed (a 2 fuse sub panel for lights and a couple of outlets). My garage is a 2 1/2 car measuring about 34' x 28' with insulation in the walls, but the rafters and ceiling are open. My goal was never to get the entire garage up to 70 degrees and keep it there for the winter, but merely to get it above 55 for about a week so I could finish staining and varnishing the trim work and jams for the windows I replaced a couple of months ago.

My first impression when I picked up the 29 lb. box that was smaller than any computer box I've had in recent years was that there is no way this little heater is going to be able to do the job, but I proceeded anyway thinking that for the price I could get a second one. I ran 10-3 from the junction box down to a wall switch and then back up to where I mounted the heater (with the breaker off). It has very straight forward wiring and simple instructions that were very easy to follow. I flipped on the breaker, fired up the heater, and put it on high thinking that this little guy would probably struggle, but I was very surprised that after about a minute it started cranking out some serious heat. I turned it down about half-way and hung a thermometer at the other end of the garage. The outside temp was around 45 and within an hour or so it was 65 in my garage. I ended up turning it down to low and even with the overnight temp getting into the low 30s my garage has maintained 60 to 70 degrees with no problem.

It's been a little over a week since I got the heater and put it in place and my staining has turned out awesome!

Click Here For Most Helpful Customer Reviews >>

After reading other reviews of this heater, I chose this as the solution for heating my detached workshop.

I had read that the spacing inside was a little tight for wiring the power cord, and this was indeed true. Not a huge deal, but could have been laid out a little better. More frustrating was that the knockout for the 1" access hole was very difficult to remove -much more difficult than in other service panels I've used. One half of it tapped loose pretty easily, but the other half would not even pry out without deforming the side wall of the case a bit A few taps with some body hammers and it was back in shape. That could have been easier, though.

One pleasant surprise I found when reading the included manual is that the unit can easily be configured for any of the following wattages: 3750, 5000, 6250, and 7500. I almost bought the smaller 5000 W unit because I was concerned that my 70 A service to my shop might not be enough to power this heater, air compressor, and other power tools I often use. Now that its installed, it appears to not be a problem, but I wish I had known that it was configurable like this as I would not have hesitated at all buying this bigger unit. If it does trip my main breaker, I can just move a wire jumper or two and lower the heater's power consumption. Brilliant. Of course, it would then put out fewer BTU's, but that's the tradeoff.

In general, I'm impressed with the unit's construction and performance. The fan moves a good amount of air and it fairly quickly raised the temperature of my 864 sq ft shop to a comfortable level. Yes, there are hot and cold spots due to lack of general air circulation, but that could be rectified with small fans in a couple of strategic locations. Using an infrared temperature meter I measured the temp of the floor to be about 47 degrees, objects at mid-height at about 55 degrees, and the ceiling in the middle of the room a toasty 70. That's with the heater thermostat set on one notch above the LO setting (and it's now 25 degrees outside). I'm confident this heater could bring my work space up to 60 or 70 if the thermostat was set higher. I'm anxious to do that test on the next really cold day (has been pretty mild so far this winter). Keep in mind my walls and overhead door are insulated. It would probably not do so well if that wasn't the case. I might consider blowing insulation in the attic space now that I have heat to keep in.

I would definitely recommend this heater to anyone looking for a heating solution for their unheated space.

Best Deals on Ceiling-Mount Industrial Electric Heater - 7500 Watt, 31.3 Amp

I needed to heat an un-insulated 2.5 car garage in the Chicago area, enough to do some wood work over the winter months. I picked this model since it was 50% more powerful than the 5000 watt heater that many reviewed. (I knew from on-line heat calculators that I needed as much heat as I could afford for my set up.)

It requires 8/2 wire, with 240v 40 amp circuit. (It actually uses about 32 amps.) I ran 8/3 (since 8/2 wasn't easily available), and installed a 50 amp outlet & cord. (40 amp outlets are not a common size.)

The unit itself is industrial, as advertised. It is smaller than you might expect for 7500 watts. A few suggestions for improvement:

1. Instructions are poorly illustrated.

2. Instructions state that 10 gauge wire can be used for the supply circuit, but 8 gauge is the proper size. (The wiring diagram inside the unit correctly states 8 gauge.)

3. There are two knock-outs for the power supply cable, one on the back, one on the left. Only one of these two is really large enough for a pre-assembled 50 amp supply cord. This will not be a problem if you are instead running 8/2 or 8/3 directly to the unit.

4. The connection terminals in the unit would be much easier to use if not located in the back corner of the unit.

5. Ability to connect remote thermostat would be nice. (Might be possible; if so, not explained in instructions.)

6. Would be nice to have LED indicating that unit is on.

How does it work? Well, I knew that it would be somewhat undersized for my needs, but I have to say I was underwhelmed when I first turned it on--the heat is noticeable only within a very small area directly in front of the unit. The fan is rated at 2x the CFM of the 5000 watt unit, so I expected the airflow to be noticeable more than 10' from the unit.

To illustrate how far undersized 7500 watts is for my needs, I turned the unit on and left the garage door closed and waited to see how long it would take for the garage to heat up. After two hours the snow finally fell off the two cars. 24 hours later the snow that fell off the cars had not yet melted! There wasn't really a huge amount of snow to melt, and the outdoor temperature during this test was not all that cold (about 25 degrees), so even leaving the unit on for extended periods does very little to heat the garage.

Overall, the unit is as advertised but could use some minor improvements. It is not well-suited for un-insulated garages, but that is not a fault of the unit itself.

Honest reviews on Ceiling-Mount Industrial Electric Heater - 7500 Watt, 31.3 Amp

The physical size of this heater is in no way proportional to the amount of heat it produces. Our garage is 18' x 36' with 13' ceilings. There is insulation, but no sheet-rock covering the framing. The unit is hung in a corner, diagonally, 11' high, and 1' from the side walls. It will raise the temperature in the back half of the structure about 10 degrees in 30 minutes. The fan pushes the air out of the corner strong enough that one can feel the air-flow 30' away. Our goal was to avoid installing ducted (ergo expensive) heat with interior and exterior units, yet find a way to take the sting out of the air to the point we could work/play in the structure. If we plan ahead a couple of hours, we can turn the heater on and come back to a comfortable environment. Goal reached and customers satisfied! The only things missing are a digital thermostat and a remote control, the latter of which would prevent me from having to climb a ladder to make an adjustment. I hesitate to mention that because this product is a great value.

Find helpful customer reviews and review ratings for Ceiling-Mount Industrial Electric Heater - 7500 Watt, 31.3 Amp

Purchased three weeks ago, this heater exceeded my expectations. I have a two car garage without insulation and I am using the low setting to heat up to 60F. The thermostat works perfectly. I am very happy with this product.

Buy Fom Amazon Now

Friday, July 11, 2014

Review of Broan 161 Infrared Single-Bulb 250-Watt Heater

Broan 161 Infrared Single-Bulb 250-Watt Heater
Customer Ratings: 4 stars
List Price: $43.22
Sale Price: $24.91
Today's Bonus: 42% Off
Buy Now

Because the heat lamp concept is not common in bathrooms, and most of the reviews were a bit vague, I was ambivalent about the purchase. After installing and using one, here is what I know.

The bathroom is of typical size; 7 by 9 feet including the shower, and an 8 foot ceiling. If your ceilings are high, you will not want this product. You immediately feel the difference in warmth from waist to head height. You will want the lamp positioned over your chilliest spot. The heat diminishes quickly stepping side to side. It will not heat your bathroom. It is not meant to be installed in the shower, or over a tub.

Like ceiling fans, the installation is not easy, especially with low pitch roofs. Crawling around in an attic, avoiding falling between the joists, is never fun. This is not an insulated enclosure, so you will have to make provisions to hold the insulation back 3 inches. As always, installing it in new construction is far easier. If you are remodeling the room, this is the time to get one.

Install a timer switch with it. At 250 watts, you will not want to forget to turn this off. I have not touched the inner enclosure to see how hot it gets, and I am not willing to test its limits. Use it when you are there, and then TURN IT OFF.

My two regrets; first, that I was not able to install it in front of the shower. That would be ideal. Second, that I did not go with the two bulb version. I believe the difference would be significant. This is not like walking into a toasty room. The effect of the bulb is immediate, and localized. Plan accordingly.

FYI: a decision will have to be made as to what version of bulb to get. According to Osram Sylvania, the red, clear, and frosted bulbs, create the same amount of heat. However, the clear and frosted bulbs put out considerably more lumens of visible light than the red. Red is often chosen to remind people that the lamp is on.

Click Here For Most Helpful Customer Reviews >>

Product arrived on time and use was flawless works as supposed to, not very fancy but fulfill the requirements: warm the bathroom.

Best Deals on Broan 161 Infrared Single-Bulb 250-Watt Heater

We were unable to use the heater once we read the installation instructions. It can not be put into any ceilings with insulation. You have to purchase the fan with the blower attached, and we don't want a blower attached, because we spent a lot of money on a super quiet fan for our bathroom, and did not want to add a noisy blower. We wanted to return it, but the shipping charges to return the product were more than $30, so we are stuck with it.

Honest reviews on Broan 161 Infrared Single-Bulb 250-Watt Heater

I cannot feel any heat from this heater when standing on the floor. When standing on a step ladder, I do feel heat up to about two feet away from the bulb. This certainly does not help keep me warm after my shower! I read all reviews before ordering, and felt confident that this infrared heater would meet my needs. I am most disappointed. FYI: My heater was professionally installed during bathroom remodel.

Find helpful customer reviews and review ratings for Broan 161 Infrared Single-Bulb 250-Watt Heater

The only drawback, if you can call it that, is that the bulb, although screwed in fully, juts past the assembly a bit. We decided to let it go as it works well. It is only a minor cosmetic issue and actually the photo indicates it is not entirely flush with the assembly unit. The entire unit works well and is a nice added feature to our new bathroom.

Buy Fom Amazon Now

Sunday, May 11, 2014

Review of Holmes HLP3310-UM Low Profile Heater w/ Digital Controls

Holmes HLP3310-UM Low Profile Heater w/ Digital Controls
Customer Ratings: 4.5 stars
Buy Now
I own a stone cottage with no central heat or air. Last fall I bought this heater for the bedroom and it worked great! It's low, allowing the heat to rise, very quiet, and I can push it up against the stone wall without worry. I highly recommend this heater for anyone looking for a stylish, quiet heat source. I'm buying two more for my living room!

Click Here For Most Helpful Customer Reviews >>

Extremely quiet heater. I have two, like it so much. Has an "eco" control button too (keeps the room regulated at a comfortable temp so you're not running a high temp for too long and wasting electricity). Timer is the best. Has 4, 6, & 8 hour intervals to choose. Now not afraid to fall asleep while it's on. Best heater for the price.

Best Deals on Holmes HLP3310-UM Low Profile Heater w/ Digital Controls

This heater works great for the price. It is a little noisy (hums a bit), but it works GREAT to heat a smallish room!!

Honest reviews on Holmes HLP3310-UM Low Profile Heater w/ Digital Controls

This heater has the LOUDEST hum I've ever heard from a space heater. If I planned on using it in a room I spend a lot of time in, I'd have to return it.

Find helpful customer reviews and review ratings for Holmes HLP3310-UM Low Profile Heater w/ Digital Controls

I am not one to criticize but these heaters are absolute junk.

Yes, they heat well and are quiet. But they burn up in two

to 3 months if left on 6 hrs per day. I have had three.

A good light bulb will last longer. I'm looking for another

brand with much better components. Todd in DenverHolmes HLH4422EE-WM Low Profile Heater with Digital ControlHolmes HLH4422-WTM Low Profile Heater with Digital Control White

Buy Fom Amazon Now

Sunday, April 13, 2014

Reviews of Optimus H-9010 Garage/Shop Ceiling or Wall Mount Utility Heater

Optimus H-9010 Garage/Shop Ceiling or Wall Mount Utility Heater
Customer Ratings: 4 stars
Buy Now
I purchased this heater because I had good experiences with a Marvin infrared heater of similar design and capacity. The Marvin failed after many years of dependable service, and since they are no longer in business I choose this Optimus brand.

I purchased my first Optimus H-9010 about a month ago, and have been so pleased with it that I purchased a second one which I installed yesterday. Here are my impressions:

o The stated specification of 600/1200 Watts is incorrect or has been changed. My heaters are clearly labeled as being 750 / 1500 watts, and testing with an amp meter confirms this is about right as it draws 6.3 / 12.3 amps.

o The installation is easy and convenient, the mounting bracket is long enough to straddle two studs spaced 24 on center. Mounting bolts are included.

o Once mounted, the heater can be rotated through 90 degrees that is tilted 45 degrees off vertical each way.

o Build quality seems good, about the same as my original Marvin heater. Indeed, aside from the addition of the light, this Optimus seems to be the same design as the Marvin.

o The unit needs to burn off a bit of factory residue, and it will stink a bit for the first 30 minutes of run time. After this period it runs clean with no smells or odors whatsoever.

o The cord is a generous 82 inches. If you must use an extension cord, make sure it is at least 14 gauge and as short as possible.

o The switch, activated by tugging on the convenient cord, has the following modes:

(0)-Off

(I)-Lamp On

(II)-one quartz element glows (750 Watts) & Lamp On

(III)-both quartz elements glow (1500 Watts) & Lamp On

o The light is a 25 Watt Halogen bulb with a G9 base. It swivels in up-down and left-right so it can be aimed where you want it. Of course this is too tiny a lamp to be used by itself for any serious work, but it never hurts to have extra light in ones shop. I like it, and I don't mind that it is always on while the heat is on, but if it's a problem I guess one could just remove the bulb.

o Operation of the unit is completely silent, with the exception that there are some slight noises as it begins to warm up (due to metal expanding, I presume).

o There is no built in thermostat, the unit is either on or off which is probably adequate for most folks. I rigged up a wall mounted thermostat that powers a ceiling socket, so I can set the heat to any desired temperature (typically about 55-60 degrees), and have found this quite convenient as I can turn down the heat when I'm not in the shop (to about 40) but still ensure that it will not freeze.

o This ceiling mounted heater seems very safe in a dusty environment such as a woodworking shop, because it points down, keeping the red hot rods clean and dust free. In about 5 years of use (with my original Marvin heater) I never had any safety issues, even though I occasionally allow some heavy dust to accumulate on the top of the unit.

o Another nice effect of these ceiling heaters is that when I have glue-ups or finishing jobs I can place them on the bench directly under the heater and they will cure faster than if place off in a colder corner.

As stated in the title, I use this heater in my woodworking shop, which is actually a converted double garage, about 680 square feet in size, located in the Southern Interior of BC Canada. It is insulated, with a wood floor over the concrete slab. The automatic garage doors, which leaked a lot of air and heat, have been removed and walled in. Before I removed the automatic garage doors and covered the cement floor with wood, I was able to keep things from freezing with just a single 1500 Watt infrared heater in fact I was usually able to keep the shop at 50 degrees or better if I allowed the heater to run long enough.

If a single heater was sufficient for my original cement floored shop, you may be wondering why I need two heaters after I've added a cozy wood floor and improved the insulation. It is so that I can better spread the heat around (by running each on half power 750 watts), and also because I can run them both full blast for the first half hour or so to bring the shop up to a comfortable temperature faster (about twice as fast, in fact).

A quick word about comparing heaters to each other. Virtually all electric heaters produce an identical amount of heat per watt. So, in the long run, any 1500 Watt heater, say a fan based unit, will make a room as warm as any infrared heater that is also 1500 watts. The difference lies in what gets warmed up first. A fan based heater first heats the air, and the air then heats the stuff in your shop, including you. The infrared first heats the stuff it's pointing at, which then eventually heats the air. If it's pointing at you, well you feel warm right away, but if it's not, then you don't feel much warmth until the whole room is warm.

If you are comparing this heater to non-electric units, it's best to compare BTUs. This one puts out about 5,000 BTUs.

Hope this was useful.

Click Here For Most Helpful Customer Reviews >>

THIS THING ROCKS!

I absolutely love this heater. I've had it for quite some time now and it puts out a good amount of warmth in my garage.

No, it doesn't make the entire garage an 80ยบ paradise on freezing winter nights, but it does help, and quite a bit. I installed it just above and behind my work bench area and in just a few minutes I can feel the air get noticeably warmer.

WELL worth the money. Would recommend to anyone who works in the garage on cold days/nights.

It installs easily, too.

Best Deals on Optimus H-9010 Garage/Shop Ceiling or Wall Mount Utility Heater

It took over 2 weeks for my order to ship so be warned that if you order this item it won't be received for around 3 weeks. It's identical to other heaters which have a different brand name, and it's cheaper but you have to hunt for it by looking for the Optimus heater and then click on the cheaper price which comes up unless you want to pay around $70. I got mine for $46.

The mounting bracket is pure crap; a soup can is made of stouter steel. Thankfully the heater unit is very light and long, sturdy screws are included for screwing into wall or ceiling studs. There's a fair bit of heat which escapes from the slits in the housing on the top of the unit which ends up hitting the ceiling. Your ceiling will get warm but not HOT.

Like others have done, I didn't really need the halogen light in the unit so I removed the bulbs. I wonder how much cheaper the heater would be without including the light.

Honest reviews on Optimus H-9010 Garage/Shop Ceiling or Wall Mount Utility Heater

I hung this near my bathroom shower and it is great on those chilly mornings. And you can also install it on it on a timer. Come w/2 speeds and a light. I recommend this seller and this product.

Find helpful customer reviews and review ratings for Optimus H-9010 Garage/Shop Ceiling or Wall Mount Utility Heater

i had two heater similar like this and the heat is much stronger than this unit. very disappointed even with the high setting

Buy Fom Amazon Now

Thursday, April 3, 2014

Review of Lakewood 792/JR 750/1500 Watt Fan Forced Utility Heater

Lakewood 792/JR 750/1500 Watt Fan Forced Utility Heater
Customer Ratings: 3 stars
Buy Now
I bought this heater a few years ago for my RV and it has performed excellent. On one trip it to Alaska it was on full power for over 2 months and no problem. A very vell made little compact unit. A+++

Click Here For Most Helpful Customer Reviews >>

I like mine when its running. I have only had to fix it about 15 times. I do like it because it was cheap, 17 bucks at Walmart, and puts out plenty of heat. These will cut off sometimes if they have to much dust in them, may be a safety feature. I had one little wire in it that kept coming loose or arcing. Had to fix that about 10 times or so. The last time must have been the trick. Someone at Walmart told me she had about 20 in the back that people had brought back. In other words, nothing but problems. But if you can fix stuff its not that bad. The case is actually very durable. Simple basic design. I may have just got a bad one. Kinda reminds me of an old car I had that ate a starter every 80,000 miles. Got so use to fixing it that it became no big deal, and only took a few minutes. I know.... strange review.

Best Deals on Lakewood 792/JR 750/1500 Watt Fan Forced Utility Heater

After 2 months of use, the fan stopped turning in this heater. This caused the heater coils to turn bright red and overheat. It started smoking profusely. My circuit breaker did NOT trip, nor did any fuses within the heater unit cut off. Luckily, I just happened to be nearby and smell the smoke. Another few minutes and my house would have likely burnt down. I will be filing a complaint with the BBB for this Lakewood product.

Honest reviews on Lakewood 792/JR 750/1500 Watt Fan Forced Utility Heater

I bought this last year. It lasted 3 months. It worked well while it worked. The store no longer carried it when I went for an exchange. I figure I paid $6/mo. for heat. That's fair enough.

Find helpful customer reviews and review ratings for Lakewood 792/JR 750/1500 Watt Fan Forced Utility Heater

I recently purchased this product--this being our 4th Lakewood utility heater. We still have our first one--the larger utility heater---it is probably 12 years old and still works fine! We use it in our garage. I bought 2 small utility heaters 2 1/2 years ago and they work great!! We use them in our bathrooms. I like that you can set your temperature and it will go on and off as needed. I have tried a ceramic heater and took it back because it didn't have this feature. Great little heaters and love they they are so small and compact, but can put out lots of heat!

Buy Fom Amazon Now

Friday, December 6, 2013

Reviews of Lasko Ceramic Tower Heater with Remote Control

Lasko Ceramic Tower Heater with Remote Control
Customer Ratings: 3.5 stars
List Price: $61.40
Sale Price: $50.20
Today's Bonus: 18% Off
Buy Now

I purchased this as an alternative to central heating, and found that this ceramic heater offered good performance for the price I paid.

Standing around 30" high, the Lasko 5365 saves a lot on floor space since it takes up more vertical space than horizontal space. Also because of this design, it can heat up more of the room at the same time.

One other thing I liked about this heater was the safety switch: as soon as you tip it over, the heater will shut itself off. If you immediately pull it back up, the heater turns back on. If it stays down or down at an angle, the heater will completely shut down. For a household with kids, this could be what saves the home from going up in flames.

The heater itself is quiet, and even though it does beep (when you turn it on, or switch modes etc.) the beep isn't obtrusive. I have another space heater which is very loud, so maybe I am making an unfair comparison.

The heater also has some other great features such as oscillation (it can turn about 180 degrees back and forth), high/low mode change (high mode for higher bursts of heat, while low mode is both quieter and emits less heat from the grille), and a timer function for those who like to set-and-forget.

Aesthetically, the Lasko 5365 also offers a modern look, which together with the blue backlit LCD display, resembles other modern appliances (DVD/stereo players, Windows Media Center PCs, etc.) in the household. Since many of my peripherals are either black or silver, this heater fits right into the decor.

One other interesting facet of this heater is that it can be remote-controlled (the included small remote has large rubber buttons and large printing, good for those with bad eyesight; uses two AAA batteries which are included). Unfortunately there is no place to hang the remote on the heater itself (unlike other heaters), but its a small caveat.

Overall the Lasko 5365 offers many of the great features found on other heaters, but at a nominal price. Considering having to pay for the high price of natural price each month, the Lasko 5365 is a very good cost-effective alternative.

Click Here For Most Helpful Customer Reviews >>

I just recently moved to San Francisco, in the winter time. In order to save from a high heating bill, i searched high and low for a cheap alternative. THis brand is it. I was using a solarus sun heater...and it got too hot! This model oscillates is at a great height, and has a remote control and timer. It's everything you need to keep you warm at night.

Best Deals on Lasko Ceramic Tower Heater with Remote Control

I've been using this heater for almost a month now, and so far, it does a good job of keeping an average sized bedroom warm. I do, however, have a few cons when using this heater during the night.

Pros:

1. It has a remote control

2. It oscillates

3. The low setting is nice and quiet

4. It has a timer, so the unit will turn off after a certain number of hours (1-8 hours)

5. It has a thermostat setting, so it will try to keep the temperature you set it at by turning itself on if the current room temperature is 1 degree below the temp you want the room at, or turn off if the room is 3 degrees above the temp you want.

6. It has a good height. It's not one of those heaters that direct the heat to your feet first.

Cons:

1. Pressing any of the buttons gives out a pretty loud beep (or two, or three). If someone else is sleeping in the same room, he/she will most likely wake up from this sound, especially if they're a light sleeper.

2. Speaking of light sleeper (which I, personally, am), the high setting of this unit is a little loud to sleep through, but I'm able to sleep through the low setting.

3. Again, for those light sleepers, the thermostat setting (mentioned in Pro #5 above) has its drawback during the night. Because the unit is trying to figure out if it the room is colder than the temperature set by the user, it will turn itself on and off (sounds like a High setting, so it'll be fairly loud) for this temperature check which lasts maybe 2 seconds. BUT, unfortunately, it keeps going through this temperature check about every 2 minutes or so. Not good for the light sleeper. ;)

4. The blue LCD remains lit, so in a dark room, the LCD might be too bright for those used to sleeping completely in the dark. Just cover it up with a post-it note or something if it bothers you.

I would probably give this unit 4 stars if the beeping sound wasn't so piercing loud and if I wasn't such a light sleeper.

Honest reviews on Lasko Ceramic Tower Heater with Remote Control

I recently bought the Lasko 6350, which I guess is the newer model of this type. It looks very similar except the display on top. I got mine for 49 bucks at target.

Pros

1. It has a remote control

2. It oscillates

3. The low setting is nice and quiet

4. It has a timer, so the unit will turn off after a certain number of hours (1-8 hours)

5. It has a thermostat setting, so it will try to keep the temperature you set it at by turning itself on if the current room temperature is 1 degree below the temp you want the room at, or turn off if the room is 3 degrees above the temp you want.

I must say this unit works very well and heats up my room fairly quickly. They replaced the blue display with a just a digital number readout in green against a black background. It can been seen in the dark as the numbers are quiet big and its not bright that it would keep you up (as in the previous post of the old model).

Cons

1. Loud in High/Auto mode. In the high mode, it is louder than my laptop. However, the low mode is very quiet and I hear more of my laptop fan than I do of the heater.

2. Low mode isnt temp adjustable, ie, it just kinda maintains a steady temperature. (72 degress on the display)

3. The temp indicator is off. It indicates a room temp of 74 when my home thermostat is showing 80. What this means is just that the temperature displayed is probably just 6 degrees lower than it probably is at. What this then means is that on low setting 72 is actually 78ish so its not so bad

What I end up doing is just turing the heater on high when I get home and then turn it to low once it hits my set temp. I is pretty good at keeping a steady heat. Even though the heater is kinda loud on high, I have yet to find a heater thats not that loud. My gf has a different heater by DeLongi and its just as loud. Hense, I dont thinks its so much a brand specific problem as it is a general product problem. IE, in order to disipate heat, you need a fan and fans are loud when blowing hard. Its unavoidable to move that much air without a fast and loud fan. If there was such a thing as a low noise fan, planes would be a lot quieter.

All in all, I gave it 4 stars just because the temp display is accurate but not precise (ie displays the a "consistantly" 6 degrees too low) which is an easy fix.

P.S. Please note, I dont know if my home heating unit is accurate either. Ive more than once thought it was off so it might be my home temp control displaying an incorrect temp

Find helpful customer reviews and review ratings for Lasko Ceramic Tower Heater with Remote Control

I just recently purchased this heater to help heat whichever room I'm occupying as I have a poorly insulated apartment. This heater definitely does wonders. It heats up a pretty good sized room fairly quickly, and keeps it warm. It's even good in drafts (although the instructions say that you should get rid of the drafts). I can put it by the door or the window and it will push warm air towards me, rather than cold.

I very much appreciate it.

Buy Fom Amazon Now