Cheap Aprilaire 413 Filter Replacement

Customer Ratings:
List Price: $64.33
Sale Price: $40.36
Today's Bonus: 37% Off

This was our first time replacing our filter. We have a aprilaire 2410 model, and were to go with the 410 filter. I ordered the 413 because I couldn't find the 410, and it's a perfect fit. It's not 6", it's 4". I'm glad I decided to try it. And the service is incredible! I ordered it on the 7th, and received it on the 9th. Great service!!

Click Here For Most Helpful Customer Reviews >>

Great replacement!!! Much cheaper than serviceman, and still cheaper than local home improvement stores. Buy a couple at a time if you have pets, that way you never run out.

Best Deals on Aprilaire 413 Filter Replacement

This was the first time we replaced the dust filter in our Aprilaire. The original filter was a #410, the box this filter came in makes it sound like the 413 is a batter filter, and we didn't even realize it. So we were happy to see that. We were happy with the deal that we got and would buy from this seller again.

Honest reviews on Aprilaire 413 Filter Replacement

Filter arrived in 3 days.

It was a genuine Aprilaire part, not a knock-off.

It fit into my Aprilaire Model 2410 furnace filter.

It was $21 less than the MSRP.

Now that I know it fits, next time I'll order the 2-pack.

Great deal.

Find helpful customer reviews and review ratings for Aprilaire 413 Filter Replacement

i had the original aprilaire filter media. it took about 10 to 20 minutes to change filter. with this kit my time was cut in half. its easier to replace and its easier to inspect.

Best Cadet Manufacturing 79202 240-Volt White Electric Forced Air Deals

Customer Ratings:
List Price: $519.99
Sale Price: $342.69
Today's Bonus: 34% Off

We purchased this heater as a replacement for a gas wall heater that was disconnected by the power company many years ago, deemed unsafe to operate. The Cadet 4000W was professionally installed, requiring both a carpenter for framing and sheetrock, and an electrician. The heater required a separate 240V feed, which was branched off of the dryer circuit. The Heater was easy to install and works very well. We have approx. 850sqft home in Bay Area, CA. This heater is capable of heating the entire space, but we usually keep a couple of rooms closed off. We had been using 1250W space heaters, the Cadet is a huge improvement, no more blown circuits. It heats the space quickly and is fairly quiet. We did our own heat-loss calcs and decided on the 4000W unit. We also liked that it has a two pole thermostat which means it can be switched entirely off. The one weakness is in the thermostat that is mounted in the cabinet, it does not seem to be very sensitive, but is adequate. For more $$$ it would have been possible to purchase and install a remote wall mounted digital thermostat. We decided on Cadet since they have recently made significant quality and safety improvements. The price may see a little high, but compared to other forms of built-in heat it is a good value.

Click Here For Most Helpful Customer Reviews >>

Minuteman International C-85 Coal Hod / Pellet Bucket, Small Review

Customer Ratings:
List Price: $109.99
Sale Price: $88.62
Today's Bonus: 19% Off

We first purchased the "Large" version of this based on the 1CU FT size. 40lb of Pellets = about 1CU FT. Folks, unless you are Paul Bunyan, I am here to tell you the Large Size is LARGE, easily as tall as a 5 gallon pail and bigger around at the top. I didn't test my theory, but I am thinking you could hold well more then 1 40lb bag of pellets. The small size has better proportions. I am not talking about how much it will hold, I mean that it physically looks better. The large one, aside from being too large, did not look quite right. The proportions were all wrong, it looked kind of goofy, like a caricature or a bucket. This one is perfect. It's the size of a normal water bucket, you know one of those galvanized buckets you use for watering livestock, or carrying grain. Essentially, that's exactly what this is. The only real difference is that it's much more attractive, and has a raised pouring lip. It is heavy duty. I don't suspect I will have any problems for the kind of duty I plan for it. But the rivets that hold both handles on leave a bit to be desired, like they might pull out. However for the hearth and pellet use, I don't see there being much of any issue. And even if they did pull out over time, this is a simple fix with some copper Rivets. Someone mentioned they thought this thing was made of copper and they were disappointed that it was actually just a fancy paint job. Two things. First, no where did the add for this say it was made of pure copper. It says it has a copper finish. If this was made of copper, it would have cost about $300 just for the copper, and who knows how much more for the manufacturing. Second, they mentioned that it's a brown Paint finish. Well, brown is a bit off the mark. It looks very much like the picture shows. And the paint is high gloss enamel. From a distance of about 5 feet, it actually looks like copper with patina. You have to be within a couple feet to realize that it's not actually copper. None the less, this does not detract from the look of it. It looks like,,,, a fancy hammered metal coal hod. It's a bit pricy, but the material is as good as it gets, and it's by far the most attractive Hod we found that fit our needs. There are of course nicer Solid Brass Hods out there. But they would not hold the amount of pellets that we were looking for it to hold. BTW, I believe this will hold a full bag of pellets if filled to the brim. We have a 56lb hopper so it only ever needs to hold up to 30lbs at a time any how. It looks very nice sitting next to our Mount Vernon AE Mahogany. If you can handle the price, you will no doubt like the Hod.

***UPDATE*** After having used this for months now, I can now tell you that it is holding up superbly. But my assumption that it could hold a full 40# bag of pellets was incorrect. It will in fact only hold a lil over a 1/2 bag of pellets. Maybe 25# with keeping them below the lowest part of the rim about 1 inch. Still, this works out nicely as one bag will top off the stove and the hod holds whats left over. At night before bed, I dump the hod into the stove and repeat the cycle again in the morning.

Click Here For Most Helpful Customer Reviews >>

This is quite nice, albeit a bit pricey--so I docked it a star. It is well made and holds about a 1/4 to 1/3 bag of pellets. Nice and handy (not to mention cool looking) to have right next to the pellet stove. TIP: Buy one of those trashcans on wheels to store pellets in your attached garage, so when you need to top-off this bucket, they are handy, and water-proofed. The description says "small" but it's actually pretty good size.

Best Lignetics Of W Virginia 40Lb Wd Pellet Fuel (Pack Of 50 Wood Deals

Customer Ratings:

I was warned by a local pellet stove repair place to not use this pellet.

You will have to look closely but you will see that it is made of hardwood and conifer.

Conifer means pine which means sap, which means trouble for your stove.

The sap will foul up the blower or auger motor.

Click Here For Most Helpful Customer Reviews >>

Discount Water Leak Alarm - Set of 3 - Improvements

Customer Ratings:

Nowhere is it written for one time use.

Ordered this in December. Self sealed with 2 metal prongs on the bottom. Worked fine the first time water escaped the sink while doing laundry. Not very loud though. But after I took it out of the water it kept ringing. Tried to dry it with paper towels, ring it dry etc, but it kept ringing. after 4hrs finally died and has stopped working. Called the company and they are refunding me the price of one device, but won't ever use it it again.

Click Here For Most Helpful Customer Reviews >>

We have been using these for over 3 years. They sound a very loud alarm at the slightest presence of water. Even a small spray from a spray bottle will set them off. I have to make sure whatever they're on is very dry after cleaning the area so they won't go off. Wish I had them in our former house when the water line to the refrigerator had a puncture and caused a lot of damage.

SEI AMZ8669E Lowery Electric Fireplace, Espresso Review

Customer Ratings:
List Price: $749.99
Sale Price: $599.99
Today's Bonus: 20% Off

This item was easy to put together, didn't break a sweat or a nail. Looks amazing and functions perfect. Thanks!

Click Here For Most Helpful Customer Reviews >>

This is really amazing for the price. I was expecting something meh but the wood is a beautiful color and the fire part looks very real. I love that it is also a heater as some of the choices are for looks only. This was one of my best Amazon purchases to date!

Fireplace Lighter Using Strike Anywhere Matches-perfect Matches Reviews

Customer Ratings:

Great idea! I use a butane cooker to fry fish but it is hard to light without placing the match and my hand too close to the burner risking a burn! The "match extender" allows me to place the match anywhere I need without my hand being near the burner or flame. I can see many uses for this handy little gadget. I will use it to light my fireplace starter burner, light camp fires, light fireworks, light barbecue pits or any other application where I want to keep my hand away from the fire!Tremendous Safe Light Matches Holder and Extender

Click Here For Most Helpful Customer Reviews >>

Discount Johnson Controls Digital Thermostat Control Unit

Customer Ratings:

I use the thermostat to control the temperature in a chest freezer that I use for fermenting beer (35-55 F). The controller works great for this purpose. I also have a second one that I plan on using to operate a HERMS device for my mashing system. You can set the controller to operate a heater or cooling device but you must reposition "jumpers" inside the unit (not difficult but a pain if you plan on doing it often). If you want a unit that switches automatically betweem cooling and heating, you are better off with the more expensive Ranco controller.

This particular controller will allow you to set the target temperature (as either a closing or openning point), the number of degrees of variance from target before the unit turns on/off, a time delay before the unit is allowed to reactivate the device(great for extending the life of a freezer or fridge), power supply on/off option in the case of unit failure and options for using remote monitoring/controlling if you choose to upgrade.

For the money, it is the best value on the market. No wiring required, simply plug in the device to the controller and the controller into the wall. The Ranco offers more options if you prefer to wire your own device or you can go all out and use a Love or other commercial controller that is fully customizable but is best mounted into a control device panel. Check out for examples of what can be done with more sophisticated controller units.

Click Here For Most Helpful Customer Reviews >>

Its easy to use...the manual makes it seem overly complicated.

SP: setpoint (for my purpose 67) the temperature you want the thing to try and maintain.

dIF: differential (1 to 30F, default = 5) I leave at default, this is the point + or from the setpoint temp (so 62 to 73 in my case.

ASd: anti-short cycle delay (0 to 12 minutes, default = 1)I set to 12 minutes, just to put the least amount of stress on the compressor.

I recommend it!

Best Deals on Johnson Controls Digital Thermostat Control Unit

Using this for home brewing. Connected to a small chest freezer. It controlled my 7 gallon fermentation vessel as well as the corny kegs. Setting the thresholds could be easier but once you understand it works exactly as advertised.

Honest reviews on Johnson Controls Digital Thermostat Control Unit

I have been looking at sous vide water ovens for years now, but could just not bring myself to spend $500 or more on one. Then I discovered the Johnson Controls Control unit. I paired this unit with the Maxi-Matic MST-800V Elite Gourmet Large 8-1/2-Quart Slow Cooker, a Danesco Roasting Rack Oval 6x9 Inch Non-stick (which fits perfectly in the bottom of the slow cooker, and a Weber 6479 Grill Press (cast iron, but covered in enamel so it won't rust). The grill press is heavy enough to hold the vacuum sealed bag with meat in it down again against the roasting rack. I use a plastic twist tie to attach the temperature probe to the handle of the grill press for accurtate water temp measurement. The temp. contoller is very easy to change from cooling to heating and directions are easy to understand in the following youtube video: http://www.youtube.com/watch?v=prbWgMY3c5c

I also purchased the Stainless Steel Toast Rack: http://www.amazon.com/gp/product/B000LWVJHA/ref=oh_details_o02_s00_i01?ie=UTF8&psc=1

and the IRIS Stainless Steel Cutting Board Organizer / Napkin Holder

The toast holder or Cutting Board Organizer / Napkin Holder can be wired to the handle of the grill press sitting on the bottom of the crock pot and used to hold smaller individually sealed pieces of meat or steaks to keep them submerged in the bath and separated.

So for a total of $177.18, I got myself, what I think, is a very nice sous vide set up that can be adapted to a variety of sizes and pieces of meat or seafood.

Addendum: 7/18/2013

Used the sous vide for the first time this weekend and it's performance was stellar. I cooked a plain, old, run of the mill, chuck roast with nothing but salt and pepper on it. I cooked it at 142 degrees for 2 1/2 days. However, next time I need to reduce the temp some. When I took it out it was medium well and I prefer medium rare. It was just pink, but no red juices. I must say though, even though it was done more than I prefer, it was the best roast beef I have ever had, anywhere, anytime. You literally could eat this without teeth it was so tender. I cut mine in pieces and dipped it in steak sauce. It really rivaled a filet mignon. If you have the time and can plan ahead, this is the only way to cook meat. I am going to do a pork loin in the sous vide for pulled pork for a pot luck I have coming up next month.

Find helpful customer reviews and review ratings for Johnson Controls Digital Thermostat Control Unit

Using to regulate the temp of my kegerater. Current refrigerator didnt have a digital thermostat just a dial from cold to coldest. This keeps the fridge/ kegerater exactly within the easy to program temp range. It could not work better. Would also work great for an in-wall AC unit.

Reviews of Real Flame Ashley Electric Fireplace, Blackwash

Customer Ratings:
List Price: $729.99
Sale Price: $643.87
Today's Bonus: 12% Off

Had shopped on line in every possible place and this fireplace is definitely the best.

It is very good looking and fits in well with my modern furniture even though it has very classical lines.

The remote and the three different lighting modes are wonderful.

The flames are adjustable, plus you can add the embers and/or overhead lighting.

All this from the remote.

And, the heat can also be controlled from the remote.

All in all, exactly what I wanted and more.

Click Here For Most Helpful Customer Reviews >>

This fireplace is very nice looking and provides extra heat in our living room. It was relatively easy to assemble, and took about half hour. The "blackwash" is not very noticeable, and it looks just flat black. I wish the fireplace had a compartment for the satellite and DVD player, as there would be plenty of room for it above the heater.

Buy DeLonghi MG7307CM Safeheat 1500W ComforTemp Portable Oil Filled

Customer Ratings:
List Price: $91.00
Sale Price: $69.71
Today's Bonus: 23% Off

In my opinion, DeLonghi oil-filled portable radiators are one of the best options for safe, reliable room heating. There is nothing to spill, no open flames, and nothing gets so hot that it would burn you instantly. You don't have to fear falling asleep while they are heating. They're nicely designed and unobtrusive, making no noise other than the occasional tick or pop as the thermostat cycles and they heat up or cool down. I find this a comforting reminder that my heater is doing its job. No assembly is required other than rotating the feet out--just pop it out of the box and it's ready to go! The cord has a holder around which it can coil, eliminating the need to tie it up, and since you just wind the cord around it, you don't have to worry that some automatic retraction device will get stuck. This model can be used with the thermostat or without, and both are very simple to operate. All controls were easy to see, even in dim light, and the instructions were clear. It's very easy to move the heater from room to room, even if it is hot, using the little hand-hold. This heater kept a very large bedroom and bath pleasantly warm even on the low setting, while outside temperatures were 36 to 43 degrees, wet, and windy. The color is a tasteful grayish white with dark gray accents, so don't be turned off thinking this is "refrigerator white." I would definitely buy another DeLonghi like this one!

Click Here For Most Helpful Customer Reviews >>

Last year I had 1 that only heated 3 rooms and one room closed off, set on 3 all Winter long, This year I purchased a 2nd one and all rooms are open and heaters are set on 2 and in November we had 19 days in the upper teens & chill factor was in the range of 20* below zero. Comparing my electric bills Nov. '09 and '10, my power bill was $33.00

lower, only $56.00 in my all electric apartment of 978 sq.ft. I am not cold, I sit in front of my PC in shorts & a t-shirt, shoes & socks. You won't be disappointed. The 1st DeLonghi heater is 7 yrs old & still works just fine, its a name that can be trusted. These heaters work better & cheaper than an a/c heat pump or baseboard heaters, I know. I live 6665' above sea level in Nevada and it does get cold & windy. A secret, "buy yourself a 6" desk-fan and set it behind a heater on the floor too warm a room 18' square, works wonders." I have 2 cats and they sleep in front of their own heater now, they have never been burnt. I am 76 yr old male. Try them, you can't go wrong...

Best Deals on DeLonghi MG7307CM Safeheat 1500W ComforTemp Portable Oil Filled

Received this in the mail today. So far I'm pretty impressed. At first I was a bit puzzled regarding the instructions and all the switches and dials this thing has but once I figured out how it worked it was easy.

I'm using this to heat up a room that is approximately 10ftx20ft, and this room has a glass sliding door on one wall, and four anderson windows all together on the other two walls (the fourth wall connects to the house). The room does have a very small (about 5ft long) baseboard radiator but it barely heats the room properly.

I have this connected to a Lux WIN100 Heating & Cooling Programmable Outlet Thermostat, and it works great. I have it set at 76F and while the middle of the room (where this radiator is placed, dead center) stays at 76F the one side of the room stays at 74.5F (where the sliding door is, and it's 55F outside right now) and the other side 75.5F which is acceptable. I do have a ceiling fan in the room on low but I may need to add a floor fan in there to help circulate the air better and keep the temperature more even throughout the room.

Oh, and I have it set on medium power and it's doing the job quite well. It was able to heat a room stuck at 67-68F to 76F in just a few hours. Almost ten degrees...pretty good IMO. I was reluctant to set it at max power (the full 1500watts) over concern it may pop a circuit breaker. Setting at medium power (1,000watts I believe?) did the job. I'm using this heater to provide ambient heating for all my fishtanks to save on electricity (if I had heaters in every fish tank, I'd end up using 2-4x more energy than I would just simply heating the room itself). The advantage to what I am using this heater for is that the fish tanks absorb a lot of the heat pretty easily and keep the room warm when the heater is not on. Even if the heater were to stay off, I'm sure the room temperature would stay pretty steady for a little while before it starts to drop.

Here are the cons:

* The instructions suck... But if you just tinker around with this thing for a little bit you'll figure out how to use it.

* Not really a con but just a warning to potential buyers, you definitely want to heed the warning in the instruction booklet to let this thing run at full power either outdoors or in a well ventilated area for 2-3 hours because it does release an odor at first. But hey, all new products release odors...name one product that doesn't. New houses wreak of pine, cars have that new car scent or a leather scent, books smell like ink, etc. But definitely let it "break in" before you put it where you need more heat.

* I'm still not sure what the "ComforTemp" button does? And the instructions suck. Either way I just have the comfortemp feature shut off since I am using an external thermostat to control this heater.

Who would I recommend this to?

People who need extra heat in a room 200 square feet or smaller, are concerned about fire safety, and want a heater that is pretty reliable. This is the only type of heater I would trust to leave on in a house without being home. So far so good...

Honest reviews on DeLonghi MG7307CM Safeheat 1500W ComforTemp Portable Oil Filled

I've purchased two of these heaters in the last 6 months. I returned the first one after about two weeks of use because of the very unpleasant odor it was generating. I followed the recommendation of another reviewer (which is consistent with the directions in the owner's manual) and ran the heater on high for 2+ hours in a well-ventilated area to "burn off" whatever coating is applied during the manufacturing process. This didn't seem to help at all as the odor persisted for the next two weeks. Because I liked the heater in general, I decided I would try another one. I ran the second heater on high for two full days, hoping that this would permanently eliminate any odor. It didn't. Months later, the odor is there any time we turn this thing on.

This might not be a big problem if you are looking to keep your basement or your garage warm, but we were looking to use this in our childrens' room. Unfortunately the odor is just too strong and without really knowing the cause, it's impossible to feel good about having young children breathing in this environment.

Find helpful customer reviews and review ratings for DeLonghi MG7307CM Safeheat 1500W ComforTemp Portable Oil Filled

Clean -no initial burning gas odors that we got with the DeLonghi EW7707CM. It takes awhile to heat up the room, but after an hour or so, you've got a warm room (this one heats a fairly large, 10' x 30' space). The ComfortTemp system, though, hasn't been of much use to us, as our space can get pretty cold (San Francisco) and seems to need more heat output.

We've had it for nearly 2 months now, and have had no problems. It's also nice that it requires no assembly -the wheels fold under.

Discount ComfortAire RAH183G 18,000 BTU Window Air Conditioner Heater

Customer Ratings:
List Price: $1,286.95
Sale Price: Price Unavailable
Today's Bonus: 22% Off

The a/c works fantastic; haven't needed the heat yet, since it's triple digit weather here in Texas. The only drawback was the instructions. Said it would take an hour to install but it took my husband and I all day. Maybe it was our fault, since we are not technicians, but the instructions were hard to follow. However we are comfortable in our 1925 home thanks to this product.

Click Here For Most Helpful Customer Reviews >>

Buy 12 x 30 x 1/2 Half Inch Air Condition Furnace Filters Qty 6

Customer Ratings:

Great filters, less expensive than leading brand. They seem wobbly and flimsy compared to their thicker version with leading brands but they are less fragile. With careful insertion in the filterframes I did not have any trouble. Once in they are sturdy and do not make noise whenever airco switches on/off. Has immediately improved airquality in our home. Huge reduction noticable in dust flying around! Verry happy with my purchase. One thing i'd like to see improved is a smaller packing box. They were shipped in original box that would have easily fit 30filters in there. Shipping air is not sustainable ....

Click Here For Most Helpful Customer Reviews >>

Discount Duraflame DFH-DH-16-T Ceramic Portable Heater

Customer Ratings:
List Price: $45.99
Sale Price: $34.00
Today's Bonus: 26% Off

I live in an old victorian 3 story home that is very expensive to heat. I purchased one of these duraflame heaters to try out. I was very surprised at the amount of heat this little dynamo put out!!!! I went back and purchased a total of 6 of theses units for use throughout my home. I live in the cold mts of Pa and can't say enough good things about this product. Buy one and your be convinced like I was!!!

Click Here For Most Helpful Customer Reviews >>

Bought this from an Amazon competitor on sale very cheap...think it was a $7.99 deal. Heats very well as good as the popular Lasko which I usually buy. The problem with the Duraflame is that it is VERY NOISY. A quality issue as I think the fan hits an edge, unbearable noise, tilting the fan with a shim under the unit sometimes takes the noise away.